Speciality 'STAKED-IN' Replacement U-Joint
Model Number: 430-14
Motor Master Power Sports
10+ Remaining
Measure Twice!!!
Take the time to double check the application from the vehicle fitment below before you press or cut out your original equipment u-joints... As hard as we try to provide you with the most accurate fitment information you should always know before you cut that the part you are replacing is going to solve the problem...
*To use this replacement u-joint you must be able to machine the inside dimension to 1.780" on the OE steel flange yoke. If you are not able to precisely machine the original flange yoke, RDL offers a new flange with the correct dimensions to work with the 430-14 U-Joint. No machining of the aluminum weld yoke is necessary as long as its not worn.
> Specifications for Speciality 'STAKED-IN' Replacement U-Joint
| Bearing Diameter: | 1.066 |
| Stack-Up Dimension: | 1.780 |
| Style of Snap Rings: | Inside Snap Rings |
| Lube Options: | 1 Lube Fitting In Cross |
| Conversion Flange- Rear End: | 414-2-3350 (430-14 fits) |
| Conversion Flange- Transfer Case (Damper): | 414-2-3351 (430-14 fits) |
> Related Documents
Jeep Commander & Grand Cherokee Flanges
The 430 Series flanges will allow you to salvage the aluminum tubing and yokes by replacing the failed u-joint with a 430-14 and these steel flange yokes. The U-Joints work with the aluminum weld yokes as long as they are not worn.
